Specifications
Engine Bay & Garage Work
Stick it to the hood or a steel panel with the magnetic tailcap, tilt the head down, and see wire colors clearly with high-CRI light. Both hands stay free.
Bend the light
1,300 lm | CRI 90+ | 0–100°
A 1,300-lumen dual-beam work light with a 0–100° swivel head, magnetic tailcap, and CRI 90+ output. Built for mechanics, electricians, and everyday carry.
Field applications
From engine bay to campsite.
Tracing wiring under a hood, walking a trail after dark, or setting up camp: the SZ3 puts light right where your hands are working.
First Responders & Roadside Crews
Clip it to a jacket or vest and tilt the head down to read paperwork, inspect a vehicle, or work a roadside scene. Signal modes are one double-click away.
Trail & Night Hiking
Clip it to a cap brim for hands-free light on the trail. Use the spotlight for distance (up to 140 m in Turbo) and flood for nearby footing.
Campsite & Night Reading
Stand it upright on a picnic table and use the flood on Low for reading or cooking (7-hour runtime). The 10-mode side light adds a soft glow to camp.
TELL WIRE COLORS APART
Typical CRI 70 light
SZ3 (CRI 90+)
Dual-beam system
Spot for distance. Flood for detail.
Switch between a focused spotlight and a wide flood with a double-click. Add the 0–100° swivel head and magnetic tailcap, and the light stays where you aim it, hands-free.
10–500 lm
Output range
The flood beam spreads soft, even light across your work area for close-up inspections, wiring, and benchwork. Output runs from 10 to 500 lumens.
130 m
140 m with both beams in Turbo
The spotlight's focused optic throws a tight, long beam: 130 m on its own, 140 m with both beams in Turbo. Use it to read a trail, check a fence line, or spot a landmark across a job site.
Specs at a glance
SZ3 vs. typical flat EDC lights
See how the SZ3 compares with typical flat EDC flashlights in battery capacity, beam layout, and color rendering.
| Key Feature / Spec | UltraFire SZ3 | Typical Flat EDC Light | What It Means for You |
|---|---|---|---|
| Color Rendering Index | CRI 90+ | CRI 70–80 | Easier to tell similar wire colors apart |
| Battery Capacity | 1,500 mAh built-in | About 1,100 mAh | 36% more capacity; use it while charging in Moonlight, Low, or Medium |
| Beam Configuration | Separate spot and flood optics | Single emitter | Spot for distance, flood for close work, or both in Turbo |
| Side Utility Light | 10 ambient effects + 3 warning modes | Usually none | Side light for camp glow and roadside signaling |
| Thermal Protection | Head-to-body thermal isolation + active temperature regulation | Body dissipation only | Helps keep the grip comfortable and steps down output when hot |
| Mounting Utility | Magnetic tailcap + 2-way deep-carry clip | Standard clip | Stick to steel, clip to a pocket or cap brim, or stand it on a bench |
Intuitive UI & Controls
Two buttons. No menus.
The main button runs the spotlight and floodlight. The side button runs the side light, hazard beacons, and ambient effects. The SZ3 remembers your last beam and brightness.
| Button | Action | Function |
|---|---|---|
| Main | Press & hold | Power on / off (returns to last mode) |
Single click | Cycle brightness: Moonlight → Low → Med → High | |
Double click (on) | Switch between spot and flood | |
Double click (from off) | Turbo: 1,300 lumens, spot + flood | |
Triple click (from off) | 1,000-lumen strobe | |
| Side | Double click (from off) | Hazard beacons: slow red flash, red/blue strobe, SOS |
Press & hold (from off) | 10 ambient light effects |
10 effects, from steady color to flame flicker.
BUILT FOR THE SHOP, THE ROAD, AND THE TRAIL.
Tested & rated
IPX6 sealed. 1 m drop tested.
Lumen and runtime figures are measured under standardized lab conditions. The SZ3 is IPX6 water-jet tested and drop-tested from 1 m onto concrete.
Water-Jet Tested
Sealed with silicone O-rings and a USB-C port cover. IPX6-rated for protection against powerful water jets from any direction. Not designed for submersion. Keep the port cover closed.
Drop-Tested from 1 m
The aluminum body was drop-tested from 1 m onto concrete at 6 angles. Lens alignment and switches kept working after testing.
Steps Down Before It Overheats
Built-in sensors monitor core temperature and step output down during long high-output use to help manage heat. Head-to-body thermal isolation helps keep the grip comfortable.
BATTERY INDICATOR
CHECK YOUR CHARGE AT A GLANCE.
The side light shows your remaining charge by color and bar length, so you know when to recharge before a job gets interrupted.
Above 75%
Full green bar
Plenty of charge
50–75%
Half green bar
Good charge left
25–50%
Amber bar
Moderate charge left
Below 25%
Red tip
Recharge soon
Low-battery alert
Below about 10%, the main beam blinks 3 times and the side light blinks red until you connect USB-C.
While charging
The side light shows a red marquee while charging. It turns solid green when fully charged.
Use it while charging
Moonlight, Low, and Medium modes stay available on USB-C power.
Indicator shows approximate charge, not exact runtime.
BUY WITH TOTAL CONFIDENCE.
Title
Title
Title
FAQ
SZ3 LAUNCH PRICING
